Boat services and custom work near Aalsmeer
Explore the boat service, maintenance, welding, cleaning, decking and custom work available near Aalsmeer and the Westeinderplassen.
Request a quoteQuickly find the type of work that matches your enquiry
The examples below help you choose between boat service, welding, season preparation, deck finishing, cleaning, aluminium boatbuilding and custom work. The exact approach is always matched to your boat, location and situation.
Discuss your own situationServices by type of work
See which situations, considerations and types of work apply to each service. The available options and approach vary from boat to boat.
Custom aluminium part or construction
Standard parts do not always fit a boat. Schilpo Boats can advise on dimensions, intended use, load and a high-quality finish.
- Situation: a custom aluminium part, bracket, construction or on-board adjustment is needed.
- Approach: assess the situation, define material and measurements, and tailor the work to its practical use.
- To discuss: fit, application, load, material choice and desired finish.
Welding for repair, reinforcement or modification
When there is damage, wear or a required adjustment, high-quality welding is important for safety, durability and appearance.
- Situation: a boat part needs repair, reinforcement or an adjustment.
- Approach: assess the material and damage, prepare the welding work and check the finish.
- To discuss: repair, reinforcement, function, material and desired finish.
Maintenance and technical inspection for a boat ready to use
Before the season or when you suspect a technical problem, an inspection helps identify problems early and solve them in a focused way.
- Situation: a boat needs inspection, fault assessment or maintenance preparation.
- Approach: check engine, systems, bow thruster, electrics and visible maintenance items step by step.
- To discuss: which points need attention and which work may be appropriate.
Preparing a boat for the season
Before the boating season, it can be useful to combine technical checks, cleaning and practical maintenance tasks.
- Situation: a boat needs to be ready for use after a period of inactivity or winter storage.
- Approach: check technical systems, electrics, visible wear, cleaning needs and other practical considerations.
- To discuss: inspection points, possible work, location and planning.
A low-maintenance teak-effect deck finish
A synthetic teak deck can visually upgrade a boat without the maintenance of traditional teak.
- Situation: a deck, swim platform or cockpit needs a smart teak-effect finish.
- Approach: discuss colour, caulking, pattern, fit and edge finishing and tailor the installation to the boat.
- To discuss: colour, caulking, laying pattern, fit and edge finishing.
Making a boat presentable for season, sale or use
A dull or dirty boat can look well-kept again with cleaning, polishing and protection.
- Situation: a boat needs to look cleaner, fresher or more presentable.
- Approach: assess condition and material, then clean, polish or protect where appropriate.
- To discuss: material, condition, preferred treatment and desired appearance.
Our standard for a published project
A project is only published when the starting point, completed work and factual result can be shown clearly.
How to help us assess your enquiry quickly
A short description is enough to get started. The more detailed your enquiry is, the faster we can advise on approach, planning and cost.
Help us understand your enquiry with photos, dimensions and intended use
The clearer the starting point is, the more specifically Schilpo Boats can advise on service, welding, teak-look deck finishing, cleaning, aluminium boatbuilding or custom work.